Canopy Art Bali

We've Got You Covered

+62 361 4721010

info@canopyartbali.com


    Canopy Art Bali

    Jl. By-pass Ngurah Rai 383 Sanur, Bali - Indonesia
    Phone: +62 361 4721010
    Email : info@canopyartbali.com

Installation

When it comes to fitting and configuring your new shade products, we provide several high quality installation options. Our team have been trained to install your purchase with the utmost care and professionalism.

Where suitable, shade products can be attached to an existing building. Steel posts are available for use where no suitable existing structure exists.

Where required we can provide and install steel post 4 inch in diameter. These poles are hot-dipped galvanized and can be powder-coated in a black or white colours.

We also provide stainless steel eyenuts and expansion screws for sail connection points.
All poles are concreted in ranging from 75cm  up to 100cm  into the ground and counter levered from 5 to 10 degree angles.


Custom and commercial sails are manufactured with a stainless steel cable double locked stitched into its perimeter. This cable terminates at a stainless steel “D”-ring located at each corner. These “D”-rings are then used to fasten the sail by either a shackle or turnbuckle to a hard point either on a post or existing structure. Each corner is further reinforced with extra layers of cloth and strapping, stiched-in, which helps to distribute forces.

All stitching is performed using a locking stitch; outdoor “awning maker” thread and is used throughout. The size of the stainless cable and rings as well as attachment hardware are designed and selected  to be the appropriate size for each sail and application.

The perimeter of each sail has a catenary curve designed into it that controls the fabric tension in the center of the sail. Therefore, when tension is placed on the perimeter cable, the fabric will have uniform tension, which will not sag or flap in the wind.